Mechanical Engineering Excellence
17 Programmes Available
Category
Programmes Available

Process Equipment & Piping Systems

Duration: 5 Days

Process Equipment & Piping Systems
Duration: 5 Days

This Process Equipment, Piping Systems training course is designed to provide practical aspects of the mechanical design of pressure vessels, storage tanks, thermal equipment, piping systems, and fluid transport machinery. This training course will discuss the performance of these components under various operating conditions including an in-depth explanation of the process of material degradation such as corrosion, erosion, fatigue, and others that may lead to component failure. Several e ...

Rotating Equipment: Start-up, Operation, Maintenance, & Troubleshooting

Duration: 5 Days

Rotating Equipment: Start-up, Operation, Maintenance, & Troubleshooting
Duration: 5 Days

This intensive training course will introduce delegates to different types of pumps, compressors, turbines and associated equipment, such as bearings, seals, filters, separators, etc. The focus of the training course will be on the start-up and operation of these machines and their optimal maintenance, diagnostics, and troubleshooting techniques. Likewise, efficient and trouble-free operation of pumps, compressors, and turbines will be discussed in depth along with their ability to con ...

Heat Exchanges Types & Application, Design, Operation & Maintenance

Duration: 5 Days

Heat Exchanges Types & Application, Design, Operation & Maintenance
Duration: 5 Days
This training course will feature the importance and relevance of the important and expensive items of equipment known as heat exchangers that are used in a wide variety of industries. It will familiarise engineers and technicians with the various standards and practices used for design, manufacture, operation, and maintenance of heat exchangers. To all these engineers with diverse backgrounds and expertise, the principle of heat exchangers design and codes will allow them to understand the rec ...

Applied Coring and Well Logging for Enhanced Reservoir Characterization

Duration: 5 Days

Applied Coring and Well Logging for Enhanced Reservoir Characterization
Duration: 5 Days

This unique training course is designed to provide deep understanding of core analysis and well logging for better reservoir characterization. Accurate measurements of routine and special (RCAL&SCAL) rock properties using core analysis and well logging reveal good evidence of hydrocarbon presence, reservoir storage capacity and flow capability. Coring and well logging offer the most tangible and direct means of determining critical reservoir parameters for making important and critical de ...

Process Engineering Essentials

Duration: 5 Days

Process Engineering Essentials
Duration: 5 Days

This course is well-matched to those professionals and practitioners who require familiarity not only with chemical engineering principles but also with many of the other engineering disciplines including mechanical, electrical and instrumentation. This is essential since Process Engineering is at the heart of much of the chemical, oil, gas, and petrochemical industries. Process Engineers are interested in the transportation and transformation of solids, liquids and gases.

In t ...

Pipeline Operations and Maintenance

Duration: 5 Days

Pipeline Operations and Maintenance
Duration: 5 Days

Pipeline systems for oil and gas industry play important role in modern industrial operations. The purpose of this training course is to present basic characteristics of efficient operation of pipelines in various engineering applications. This training course will cover the interaction of pipelines with flow moving equipment, i.e. pumps and compressors and technical characteristics of operation of pump and compressor stations. The delegates will be introduced to main points of ...

Mechanical Engineering Essentials

Duration: 5 Days

Mechanical Engineering Essentials
Duration: 5 Days
  • The Mechanical Engineering Essentials training course will enable Technical personnel to familiarise not only with sound engineering principles but also with other engineering techniques including inspection; monitoring and condition evaluation. This intensive training course is designed to allow individuals working in fields such as mechanical, process and petrochemical engineering, and other related fields, an opportunity to update their skills and improve their basic knowledge of mode ...

Process Utility Systems

Duration: 5 Days

Process Utility Systems
Duration: 5 Days

The Process Utility Systems training course will feature the importance and relevance of process utilities used in today industrial operations. It will familiarise the delegates with the various practices used for selection, operation and maintenance of various equipment used in process utilities. It will be demonstrated how these utility systems are efficiently integrated into oil and gas facilities. This training course will also cover important practical aspects useful for engineers and op ...

Process Plant Optimisation & Energy Conservation

Duration: 5 Days

Process Plant Optimisation & Energy Conservation
Duration: 5 Days

This intensive training course will provide delegates with the required skills to ensure cost-effective operation and maintenance for their process plant. Optimum modes that produce the most efficient results, consistent with the safe and reliable operation will be studied in detail. Plant energy consumption and reliability are the foundation of process plant optimisation. For optimisation benefits to be sustainable, production interruptions must be kept to a minimum, which requires e ...

TEMA & HTRI Heat Exchanger Design & Cost Saving Management

Duration: 5 Days

TEMA & HTRI Heat Exchanger Design & Cost Saving Management
Duration: 5 Days

This training course provides an in-depth practical understanding of major proven heat exchanger technologies and “state of the art” fouling mitigation technologies. Pro’s and Con’s of several - heat exchanger types are presented explained with life operational examples.

This intensive training course provides a good mix of theory and common practices using highly interactive case studies where attendees are encouraged to use in-house heat exchanger type selection software and rigorous ...

Design Criteria in Instrumentation Engineering

Duration: 5 Days

Design Criteria in Instrumentation Engineering
Duration: 5 Days

This is a 5-day training course jam-packed with all that the delegate needs to know, with respect to instrumentation design specific for the oil and gas industries. The control of a plant determines the efficiency of that plant. Therefore, the design of the instrumentation equipment used in the plant (used for measurement and control) is absolutely vital. This would be both from an operational as well as a safety point of view. This training course focuses on getting the plant instrume ...

Process Plant Troubleshooting & Engineering Problem Solving

Duration: 5 Days

Process Plant Troubleshooting & Engineering Problem Solving
Duration: 5 Days

This intensive training course is a must if a company’s goals include reducing costs and preserving the lives of the employees because it delivers a wide range of pro-active, efficient troubleshooting skills. It has been proven that technical competence alone is no longer enough to ensure consistent operational performance. Excellent troubleshooting skills are considered a core competency for 'Best-in-Class' modern industrial companies. In the competitive world that we are living in, it is es ...

Process Control Valves and Actuators

Duration: 5 Days

Process Control Valves and Actuators
Duration: 5 Days

This course delegates with all the necessary knowledge to enter the world of valves and actuators. The workshop is highly interactive, and is suitable for all delegates, regardless of their background. Whether you are part of the team purchasing the valves, or a key member involved in implementing maintenance activities, or a process control specialist, this is the one course that you should not miss out on! Valves, actuators, associated equipment, process control using valves – this and much ...

Corrosion Control in Gas, Oil & Water

Duration: 5 Days

Corrosion Control in Gas, Oil & Water
Duration: 5 Days

This training course provides deep knowledge of corrosion and focuses on the examination and identification of metallurgical problems that occur in process units and methods of monitoring and damage reduction. The equipment costs are a considerable part of the investment in the petrochemical and water industry, and for long-distance, large-diameter pipelines, they can become prohibitively high if the corrosivity of the fluid necessitates the use of corrosion-resistant alloys instead of ...

HVAC Design, Operation & Maintenance

Duration: 5 Days

HVAC Design, Operation & Maintenance
Duration: 5 Days

HVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to any organization, company, facility, building, production, operation, maintenance and other departments. This training course is planned to define the proper route for HVAC design, operation, and maintenance. “Comfort conditions” are the golden words used by HVAC p ...

Industrial Heating Systems

Duration: 5 Days

Industrial Heating Systems
Duration: 5 Days

Heating systems and heat exchangers play essential roles in all of the industrial processes. This training course provides clear understanding and best practices for commonly used industrial heating systems. The training course covers the fundamentals of industrial heating processes and equipment and outlines opportunities for energy calculations and saving opportunities. It also discusses the merits of using a systems approach in identifying and implementing these improvement opportunities. ...

Mechanical Equipment: Compressors, Pumps, Seals, Motors and Variable - Speed Drives

Duration: 5 Days

Mechanical Equipment: Compressors, Pumps, Seals, Motors and Variable - Speed Drives
Duration: 5 Days

This Mechanical Equipment training course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and compressors, motors and drives and their associated systems and components. The applications of these equipments will be discussed along with their suitability for different operational duties and selection criteria. In addition, the seminar will ...

scroll to top